Memmert AtmoCONTROL Manuel d'utilisateur télécharger pdf (Page 27)

D24042 | Date 09/2014 27

AtmoCONTROL

4.4.4

Programme example

loop

27 3 5

6 8

Unload

250 °C

20 °C

0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0%

1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h

1 4

Fig. 11

First, the appliance heats up to 250.0 °C (2) for one hour (1). Then, the fan begins to run at 80

Fig. 11

First, the appliance heats up to 250.0 °C (2) for one hour (1). Then, the fan begins to run at 80

Fig. 11

% power (3) and the temperature is lowered for one hour (4) to 20.0 °C (5). Subsequently, the

First, the appliance heats up to 250.0 °C (2) for one hour (1). Then, the fan begins to run at 80

% power (3) and the temperature is lowered for one hour (4) to 20.0 °C (5). Subsequently, the

First, the appliance heats up to 250.0 °C (2) for one hour (1). Then, the fan begins to run at 80

fan is switched off (6). This sequence is repeated from the jump target (7) ten times (8).

% power (3) and the temperature is lowered for one hour (4) to 20.0 °C (5). Subsequently, the

fan is switched off (6). This sequence is repeated from the jump target (7) ten times (8).

% power (3) and the temperature is lowered for one hour (4) to 20.0 °C (5). Subsequently, the

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Pas de commentaire

Memmert AtmoCONTROL Manuel d'utilisateur Page 27